Future-proof hybrid heating

From mid-2025, the Xtend range will be further expanded. To be well-prepared for the future, Intergas is launching the Xtend Eco based on propane gas (R290) in 5 and 7 kW versions. No F-gas certification is required for installation. Propane is a natural refrigerant, with a much lower Global Warming Potential (GWP) than current common refrigerants. Propane heat pumps are therefore an environmentally friendly and energy-saving way to heat a home.

Features

  • Air-to-water R290 Monobloc in 5 and 7 kW
  • Compact Indoor unit with proven Heat Pump Control technology
  • Can be installed in one day
  • Easy installation wizard to save time on commissioning
  • Remote monitoring and over-the-air software updates
  • Cascading up to 2 outdoor units of the same size is possible
  • Clever noise reduction
  • Cut gas consumption by up to 80%
  • A+++ rating (35°C) / A++ (55°C)
  • Outlet water temperature up to 65°C
  • Both cooling and heating possible

Design freedom

One of the key benefits of the Xtend is its compact design. This ensures both you and the homeowner have greater flexibility in deciding where to install the indoor and outdoor units. The indoor unit is one of the smallest on the market and can be fitted anywhere in the home providing it’s within 15m of the boiler. Similarly, the outdoor unit, which is smaller than a stand-alone heat pump, can be sited outside the property, as long as it’s within a maximum distance of 10m from the indoor unit.

Please note: the installation must comply with manufacturer’s instructions and building regulations

Save configuration time

On the top of the Hybrid Heatpump Control Unit is a QR code that allows you, as an installer, to easily walk through the Xtend setup process. This way, after installation, the system can be optimally configured in just a few steps. Via the Service Dashboard, you have direct insight into any malfunctions that occur on the device. Based on this, remote diagnoses can be made, and it is even possible to adjust parameters without you having to come to the house specifically for this.

Ultimate efficiency

When you install an Intergas combi as part of our hybrid heating system, you’re guaranteed efficiencies others cannot match. With our revolutionary bithermic heat exchanger, all our boilers efficiently condense in both heating and hot water modes. They respond quickly to heat demand while keeping carbon emissions to a minimum. Add to this a robust build, a maximum of four moving parts and no diverter valves in our combis, you have boiler reliability that’s off the scale.

Would you like more information? Please fill out the form below